Model: HS-G40-5Low flash grade
Good mechanical properties, creep resistance, high toughness, high heat resistance, flame retardant, resistance to chemical corrosion, excellent electrical properties, processing dimensional stability, low shrinkage, radiation resistance, suitable for the production of various types of thin wall parts. Standard uses a variety of industry.
Field of application
For connector, the hair straightener, connectors, frequency divider and a variety of instrument components, shell in the electronics industry. For a variety of high performance thin wall parts as high strength, high temperature insulation in the aerospace industry. Used in the production of valves, insulation devices in chemical industry. For the production of precision parts, shell with high strength, high temperature resistant contactor parts in military product. Materials are universal.
Field of application
For connector, the hair straightener, connectors, frequency divider and a variety of instrument components, shell in the electronics industry. For a variety of high performance thin wall parts as high strength, high temperature insulation in the aerospace industry. Used in the production of valves, insulation devices in chemical industry. For the production of precision parts, shell with high strength, high temperature resistant contactor parts in military product. Materials are universal.
Model Specification
Manual
| Item | Test Method | Non reinforced | Unit | |
| HS-G40-5 | ||||
| High toughness | ||||
| Density | GB1033 | 1.35 | g/cm3 | |
| Dewatering (23℃﹑Water for 24 hours) | IS0 62 | 0.02 | % | |
| Melt viscosity (310℃、1,000/sec) | ISO 11443 | 500 | Pa·s | |
| Molding shrinkage (80□×2mmt) | Flow direction | GB 15585 | 1.09 | % |
| Vertical direction | GB 15585 | 1.35 | % | |
| Tensile strength | GB 1040 | 90 | MPa | |
| Elongation at break | GB 1040 | 5 | % | |
| Bending strength | GB 9341 | 115 | MPa | |
| Flexural modulus | GB 9341 | 3,800 | MPa | |
| Cantilever beam impact strength(notched) | GB T1343 | 4.5 | kJ/㎡ | |
| Load deformation temperature (1.82MPa) | GB T1634 | 100 | ℃ | |
| The linear coefficient of thermal expansion (ABM) | Flow direction | ISO 11359-2 | 4 | x10-5/℃ |
| Vertical direction | ISO 11359-2 | 6 | x10-5/℃ | |
| Fire resistance | UL94 | V-0 | —— | |
| Dielectric constant (1KHz) | IEC 60250 | 3.6 | ||
| Dielectric constant (1MHz) | IEC 60250 | 3.6 | ||
| Dielectric breakdown strength (1KHz) | IEC 60250 | 0.0004 | ||
| Dielectric breakdown strength (1MHz) | IEC 60250 | 0.001 | ||
| Dielectric breakdown strength (3mmt) | IEC 60243-1 | 19 | kV/mm | |
| Volume resistivity | IEC 60093 | 2x1016 | Ω·cm | |
| Surface resistivity | IEC 60093 | 7 x1016 | Ω | |
| High conductive tracks (CTI) | IEC 60112 | 125 | V | |