Model: PA
The above pictures are for reference only, according to the real object accurately. To meet customer needs, we can specially made according to the properties of the product by R&am
Model Specification
Manual
| Item | Test method | Unit | Conditions | Grade | |||||
| ASTM | T10 | G10 | G20 | G25 | G30 | ||||
| Physical properties | |||||||||
| Density | D792 | g/ | 110 | 1.24 | 1.27 | 1.3 | 1.35 | ||
| Moisture Absorption | D570 | % | 23,24hr | ||||||
| Molding shrinkage | D955 | % | 1.4-1.8 | 0.6-1.2 | 0.6-1.0 | 0.6-1.0 | 0.4-0.8 | ||
| Mechanical properties | |||||||||
| Tensile strength | D638 | Mpa | 60 | 85 | 100 | 125 | 150 | ||
| Elongation at break | D638 | % | |||||||
| Bending strength | D790 | Mpa | 91 | 125 | 155 | 200 | 210 | ||
| Bendingl modulus | D790 | Mpa | |||||||
| Charpy impact strength | ISO179 | ||||||||
| Non gap |
|
120 | 58 | 65 | 70 | 75 | |||
| Gap |
|
10 | 7.5 | 11 | 13 | 15 | |||
| Thermal properties | |||||||||
| Temperature of thermal deformation | D648 |
|
1.82Mpa | 75 | 190 | 230 | 248 | 250 | |
| Coefficient of linear expansion | D696 | 1/ | |||||||
| Combustion | UL-94 | 3.2mm厚 | - | HB | HB | HB | HB | ||
| Electrical properties | |||||||||
| Dielectric constant | D150 | 106Hz | 2.9 | 3.1 | 3.1 | 3.1 | 3.1 | ||
| Dielectric loss angle tangent | D150 | 106Hz | 2.0* | 3.0* | 3.0* | 3.0* | 3.0* | ||
| Volume resistivity | D257 | Ω.m | 1012 | 1013 | 1013 | 1013 | 10 | ||
| Dielectric strength | D149 | MV/m | 2mm | 30 | 30 | 30 | 30 | 30 | |
| Technology characteristics | Good fluidity Impact resistance | 10%Glass fiber reinforced | 20%Glass fiber reinforced, heat-resistant | 25%Glass fiber reinforced, heat-resistant | 30%Glass fiber reinforced, heat-resistant | ||||
| Molding conditions |
Dry temperature（ )
|
Dry time（h) | Item | Barrel temperature | |||||
| Back end | |||||||||
| 130 | 4 | Non enhanced | 220-265 | ||||||
| Enhanced | 230-240 | ||||||||
| Note: the above data is not the product of standard factory. For reference only. | |||||||||